クレイジー・チューブ・サーキットのGolden Ratioは、FET、OTA、OPTOと3つのコンプレッションモードを搭載した多機能・高性能なコンプレッサーです。
カッティングにピッタリなコンプサウンドからスタジオクオリティのナチュラルなサウンドまで、また原音とのブレンドや細かいセッティングの調整を行うことで多彩なサウンドメイキングが可能です。
ギター、ベースどちらにも使用できますので、スタジオワークからステージまで幅広い現場でご使用ください。

■Compression Circuit Selection Toggle Switch: 3 Modes [FET compressor, OTA compressor, OPTO (Optical) compressor]
■Threshold/red LED Compression Indicator: Adjust the Amount of Signal That Goes into the Compression Detector Circuit. When the Red LED Flashes Brighter Compression is Engaged. Higher Levels of Signal Will Result in More Compression / LED Brightness.
■Ratio: Adjust the Amount of Compression /Gain Reduction. Range From Full Counter Clockwise to Full Clockwise FET: from 1.5:1 to 10:1 (1) • OTA: from 1 :1 to 20:1 • OPTO: from 1.5:1 to 15:1
■Attack: Set the Time Until Compression (Gain Reduction) Begins. Time Constant Increases as You Turn Clockwise. FET, OTA Circuit Range: 1ms to 30ms • OPTO Circuit Range: 3ms to 33ms
■Release: Set the Time Until Compression (Gain Reduction) Stops and Returns to the Initial Level. Time Constant Increases as You Turn Clockwise. FET, OTA Circuit Range: 50ms to 4s • OPTO Circuit Range: 80ms to 4s
■Blend: Set the Perfect Mix Between Dry-Uncompressed Signal (100% Counter-Clockwise) and Wet-Compressed Signal (100% Clockwise). Add Punch and Sustain without Losing the Dynamics of Your Signal.
■Volume: Set the Output Level of Your Compressor Unit. Use for Makeup Gain or as a Clean Boost
■Bypass Footswitch (Soft-Click): Engage or True Bypass Your Effect Via a High-Quality Relay. White LED Indicates That the Compressor Effect is Engaged.
■Input Impedance: 1M
■Output Impedance: 1k
■Power Supply: 9V DC Center Negative, Regulated / Stabilized. Max Current Consumption 50mA at Internal 9V Headroom Setting, 80mA at internal 18V Headroom Setting.